Product Features
1. Multiple-level power adjustment
Total power: 3 kW; features 6-step, 500 W incremental adjustment with flexible mode combinations; step resolution: 500 W; power factor: 1; resistance accuracy: ±3%; stable load output.
2. Forced air cooling
Equipped with two 15050 AC fans for heat dissipation through the front-to-back air duct, ensuring continuous 24/7 online operation.
3. 4U standard rack-mounted enclosure
Two placement options – handheld or on-floor – suitable for both wall-mounted installation or placement on a countertop; total weight ≤ 29 kg
4.Power Supply Adaptation
AC220V,50Hz input; the fan is equipped with an integrated AC220V power supply; IP20 indoor protection rating – suitable for dry, ventilated operating environments ranging from 10°C to 50°C.
Application Scenarios
1. Lifespan testing for UPS power supplies, inverters, and energy storage systems – simulating actual load operating conditions.
2.Performance testing and discharge testing for power supply products such as charging pile modules, switching power supplies, and adapters
3.Laboratory power supply R&D and testing – including load simulation, load validation, and reliability testing.
4.Factory testing and factory aging for electrical equipment, portable power supplies, and backup power supplies
Common Questions & Answers
Q1:What is the maximum power output of this load cabinet, and what is its minimum adjustment range?
A:Rated total power: 3 kW; minimum step increment: 500 W; allows configuration of load powers in multiples of 500 W, ranging from 500 W to 3000 W.
Q2:Can the equipment operate continuously 24/7 without stopping?
A: Supports continuous 24/7 online operation; however, ensure proper environmental ventilation and do not obstruct the air intake or exhaust vents; maintain the ambient temperature between 10–50°C.
Q3:What are the installation methods?
AStandard 4U rack-mountable; can also be placed directly on a work surface; includes carrying handles and foot pads.
Q4: The output is a C20 socket – what does this mean?
A:C20 is an industrial power socket designed for C19 plugs, featuring three independent socket outlets for connecting external test equipment.
A: This model does not have built-in load protection; an external circuit breaker or protection device must be installed during use to prevent operation under excessive power load.
| Product parameters |
| Model |
JH-RYF-3KWA220-W6K-4U |
| Brand |
Jianhong |
| Dimensions |
530*483*178MM(L*W*H) |
| weight |
≤29KG |
| Rated voltage |
AC220V 50HZ |
| power rating |
3KW |
| Fan power supply |
AC220V,50 Hz (Internal connection: one set) |
| Power factor |
1 |
| Accuracy of resistance |
±3%(Sheet resistor)
|
| Cold mode |
Forced air cooling; from front to rear: 15050 fans – 2 (220 VAC power supply) |
| Work environment |
Work environment temperature: -10°C to 50°C; dry and well-ventilated. |
| Mode of control |
Manual circuit breaker |
| Class of protection |
IP20 (Indoor) |
| Display mode |
Each independent display group (provided by the customer) |
| Power Setting |
Group 1: 500 W, 500 W; Group 2: 500 W, 500 W; Group 3: 500 W, 500 W |
| Load Protection |
Current overcurrent protection (overtemperature alarm, overvoltage protection, fan fault alarm; emergency stop option available) |
| Step accuracy |
500W |
| Way of working |
NO |
| operate mode |
Operates continuously online with 24/7 availability and comes with a 1-year warranty. |
| Load Output Mode |
3 sets of C20 sockets
|
| Mobility mode |
Handheld floor mat |
